A Similarity Solution for Oil Lens Redistribution Including Capillary Forces and Oil Entrapment

Redistribution of a LNAPL lens (oil) at the phreatic surface is described using a multi-phase flow model, with emphasis on the effect of oil entrapment by water. The flow process is analyzed under the assumption that the vertical capillary and gravitational forces balance. Vertical integration leads to explicit functions which approximate the relations between the free oil volume per unit lateral area and the vertically averaged oil relative permeability on the one hand and the vertical position of the interface between zones with either two or three phases on the other hand. A linear relation between the trapped and free oil volume per unit lateral area approximates the vertically integrated nonlinear expression for the trapped oil saturation. The resulting differential equation admits a similarity solution describing the lateral spreading of free oil and the amount and location of trapped oil. Comparison with illustrative numerical computations, which are based on the nonreduced flow model in a two-dimensional planar or axisymmetric domain, shows that the analytical solution provides a good approximation of the free oil distribution at all later times.     

防护林带：湍流的数学模型与计算机模拟

虽然防护林用于减小风速、控制热量和水汽传递及污染物扩散、 改善气候与环境、增加作物产量等已经有几百年了, 但直到近几十年, 人们才开始系统地研究防护林空气动力学的遮蔽机制.在本综述中,我 们考察了绕防护林带的流动与湍流控制机制,最新的模型与数值模拟 研究情况;通过数值模拟与实验数据的比较,来了解防护林带结构与防 风效果之间的关系;讨论数值分析如何及为什么能够得到所需要的结果. 本文将从多孔隙防护林带流动基本方程组的推导开始,讨论数值模型及 模拟过程,对附体与分离流动进行预测;分析了遮蔽机制与动量交换;对 风向、防护林密度、宽度和三维性对流动与湍流的影响作了系统的论 述.还对热流和土壤水分蒸发的新模型及数值模拟作了简述.最后,我们 对网络工作站、群和高性能分布式并行计算机及其对防护林带模型预 报能力的提高作了讨论.     

TOPOLOGY AND VORTEX STRUCTURES OF A CURVING TURBINE CASCADE WITH TIP CLEARANCE (Ⅰ)- EXPERIMENTAL MODEL AND TOPOLOGICAL FLOW PATTERNS ON BOTH ENDWALLS AND BLADE SURFACES

By means of ink trace visualization of the flows in conventional straight, positively curved and negatively curved cascades with tip clearance, and measurement of the aerodynamic parameters in the transverse section, and by appling topology theory, the structures on both endwalls and blade surfaces were analyzed. Compared with conventional straight cascade, blade positive curving eliminates the separation line of the upper passage vortex and leads the secondary vortex to change from close separation to open separation, while blade negative curving effects merely the positions of singular points and the intensities and scales of vortex. Foundation items: 973 Project of China; the Doctoral Foundation of Education Ministry of China (EDAF24403003) Biography: YANG Qing-hai (1969−)     

基于遗传算法的水轮机振动参数识别

通过对水轮机现场测试数据的频域分析，建立了测点位移响应的参数正模型。并基于遗传算法，建立了在时域内识别结构振动参数的数值方法，采用该方法对水轮机位移响应正模型的待定参数识别进行了研究。计算结果表明，所建立的基于遗传算法的参数识别方法具有良好的稳定性、抗观测噪声能力和较高的识别精度，能够反演出比较符合实际情况的位移响应振动模型。这就为荷载识别、结构优化和预报减震效果等后续工作提供了可靠的实施前提。     

Analysis of Unsteady Motion with Respect to Noise Sources in a Gas Turbine Combustor: Isothermal Flow Case

In order to evaluate the direct and indirect contributions to the total combustion noise emission, a combustion chamber consisting of a swirl burner and an exit nozzle of Laval-shape, representing a gas turbine combustor, is investigated by means of experiments and large eddy simulation. Focused on the isothermal flow case first and encouraged by a good overall agreement between the LES and the experimental data for the flow field, a first characterisation of the flow with respect to noise sources is performed. To analyse acoustic properties of the flow, time and length scales are evaluated inside the combustor. Furthermore, the evidence for the existence of a precessing vortex core (PVC), typical for configurations with swirl, is revealed. Finally, the effect of the PVC on the flow inside the Laval nozzle is discussed.     

高耸异型烟囱结构风压和风振系数试验研究

本文在模拟的大气边界层中,对某一发电厂高耸异型烟囱的刚性模型进行了测压试验研究,得到了这一结构的平均风压系数、最大和最小风压系数分布,以及该结构的风荷载体型系数;结果表明在烟囱外形明显变化的局部区域,风压绝对值较大,与理论分析一致。同时,对动态测力试验模型进行了高频动态天平测力试验研究,详细介绍了试验及数据处理方法,根据试验结果计算得到了该烟囱在风作用下的动力响应和风振系数;根据试验结果计算所得的风振系数值大于按规范公式估算值。这些结果不仅为结构的风荷载计算提供了依据,也有助于进一步认识该类异性烟囱结构的风荷载和风振特性。     

Ferroelectric liquid crystals from banana-shaped achiral molecules with vinyl end groups

Banana-shaped achiral compounds, the 1,3-phenylene bis[4-(alkenyloxyphenyliminomethyl)benzoate]s, were synthesized with varying length of the alkenyl group; their ferroelectric properties are described. The smectic mesophases, including a switchable chiral smectic C (SmC*) phase, were characterized by differential scanning calorimetry, polarizing optical microscopy and the triangular wave method. The presence of vinyl groups at the ends of the linear side-wings in the banana-shaped achiral molecules, containing a Schiff's base mesogen, induced a decrease in melting temperature and formation of the switchable SmC* phase in the melt. The compound having the octenyloxy group exhibited a spontaneous polarization of 120 nC cm^?2 on reversal of an applied electric field.     

信息化课堂教学设计--以“刚体定轴转动的角动量及角动量守恒定律”为例

遵循“学生主体、教师主导”的教育教学理念,借助信息化教学工具,合理有效地设计好每一个教学环节.采用演示、体验、探究、问题导向和分组讨论等教学手段和方法,让学生在课堂中自主发现问题、分析问题并解决问题,实现“学生做中学、教师做中教”,大大提升教学效果.     

外部光注入的光泵浦自旋垂直腔表面发射激光器中的两个混沌偏振分量对两个复杂形状目标中的多区域精确测距

基于外部光注入的光泵浦自旋垂直腔表面发射激光器(vertical cavity surface-emitting laser,VCSEL)的两个混沌偏振分量,提出了对两个复杂形状目标中的多区域精确测距方案.这里,两个混沌偏振探测波具有飞秒量级快速动态并且被双极性sinc波形调制,使它们具有时空不相关特性.利用这些特性,通过计算多束延时反馈混沌偏振探测波形和与之相对应的参考波形的相关性,实现了对两个复杂形状目标多区域位置矢量精确测量.研究结果表明,对多区域小目标的测距具有非常低的相对误差(低于0.94%).当光电探测器的带宽足够大时,其测距的分辨率达到0.4 mm,并具有很强的抗噪声能力.本文的研究结果在复杂形状目标的精确测距方面具有潜在应用.     

圆形阵列光电探测系统双目标识别方法

针对双弹丸同时着靶情况下的立靶坐标测量问题,提出一种圆形阵列光电探测系统的双目标识别方法。采用光电探测器件组成1个圆形的探测阵列,并将3个发光角度均为60°的扇形一字线激光器均匀设置于圆形探测阵列上组成探测光幕。当2发弹丸同时穿过探测光幕时,会在圆形探测阵列上产生6个弹丸投影,通过信号处理电路识别6个弹丸投影的中心位置,最后通过系统弹丸着靶坐标测量公式计算得到2发弹丸的着靶坐标。在对系统测量原理进行论述的基础上,建立了系统的弹丸着靶坐标测量模型,并对坐标测量误差进行了分析和仿真。仿真结果显示,系统在测量靶面为1 m×1 m时的X坐标测量误差标准差最大为2.7 mm,Y坐标测量误差标准差最大为0.6 mm。实验结果表明,系统在测量靶面为1 m×1 m时的X坐标测量误差标准差为2.22 mm,Y坐标测量误差标准差为1.98 mm。因此,该文所提出的系统可以有效测量弹径4.5 mm及其以上的双弹丸着靶坐标。